華為AC+AP無線配置方法
組網示意圖：
前提條件：
1)所有設備工作正常
2)依據上述組網建立測試環境
1)正確配置AC使AP發放SSID:“SSID-Temp1”、“SSID-Temp2”和“SSID-Temp3”，且對應業務vlan為：vlan-1，vlan-2，vlan-3；
配置Switch
[Switch]vlan batch 100 101 102 103
[Switch]interface GigabitEthernet0/0/1
[Switch-GigabitEthernet0/0/1]description Link-to-AP
[Switch-GigabitEthernet0/0/1]port link-type trunk
[Switch-GigabitEthernet0/0/1]port trunk pvid vlan 100
[Switch-GigabitEthernet0/0/1]port trunk allow-pass vlan 100 101 102 103 [Switch-GigabitEthernet0/0/1]quit
[Switch]interface GigabitEthernet0/0/2
[Switch-GigabitEthernet0/0/2]description Link-to-AC
[Switch-GigabitEthernet0/0/2]port link-type trunk
[Switch-GigabitEthernet0/0/2]port trunk allow-pass vlan 100 101 102 103 [Switch-GigabitEthernet0/0/2]quit
配置AC
1.配置接口和VLAN信息，AC為DHCP Server，為AP和client分配地址
[AC]vlan batch 100 101 102 103
[AC]interface GigabitEthernet0/0/1
[AC-GigabitEthernet0/0/1]description Link-to-SW
[AC-GigabitEthernet0/0/1]port link-type trunk
[AC-GigabitEthernet0/0/1]port trunk allow-pass vlan 100 101 102 103
[AC-GigabitEthernet0/0/1]quit
相關資源：華為AC和AP的配置及升級降級方法.doc
